Cave Diving Lights 860 Lumens High Brightness CREE XM-L LED 860 Lumens 

PRODUCT SPECIFICATIONS:

Operation Instruction

Successive switching ON-OFF within two seconds to cycle through high, low, strobe

ON/OFF

When the light is off,turn the lamp tail clockwise until it activates.DO NOT OVERTIGHTEN.To turn the light off,back off the lamp tail counter-clockwise 90 degree or less than one full turn.For underwater use,backing off more than one full turn will probably cause flood.

Continue to back off for approximately one full turn to elimate the possibility of the light activating accidently in storage.

LOW BATTERY WARNING

The light flashes 3 times if the battery voltage is less than 10% ;it repeats after 5seconds,and then switches to low brightness.The light switches off when the voltage is less than 5%.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.