Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery AIA-1 manufacturer from China Xiware Technologies Ltd,.

Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery

<st

Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery

Quick Details:

Rechargeable scuba diving light
860 Lumens with Cree XM - L U2 LED
Waterproof 100 Meters underwater
High quality with competitive price
860Lumens diving flashlight
Cree LED bulb

PRODUCT SPECIFICATIONS

Model	W16XL Diving Light
Bulb	Cree XM-L U2 (Max 860 lumens)
Color temperature	6500K
Three output levels	High> Low>Strobe
Runtime	High: 70min, Low: 320 min, Strobe: 150 min
Reflector	Glossy Aluminum reflector
Lens	8mm Polycarbonate Board
Body material	Durable aircraft-grade aluminum
Angle of light beam	6° hot spot, 110° periphery
Surface treatment	Premium Type III hard-anodizing
Color	Black
Battery	18650 Li- ion battery *1
	With battery over-discharging protection, polarity reversing protection
Operation voltage	2.8V to 4.5V
Waterproof	100 meters underwater
Dimensions	148(length)23(dia. of end)50mm (dia. of head)
Weight	210grams (without battery); 260 grams (with battery)
Underwater Weight	130 grams (with battery)
Impact resistance	1.5M

ON/OFF

Turn the tail clockwise until the light activates. DO NOT OVERTIGHTEN.

To turn the light off, back off the tail counter-clockwise until the light goes off.

Continue to back off for approximately one full turn to eliminate the possibility of the light activating accidentally in storage. For underwater use, backing off too much will allow water to enter past the o-ring.

MODES CHANGING

Successive switch ON-OFF within two seconds to cycle through high, low, strobe.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.