Portable Underwater Scuba Light Rechargeable 2600 Lumens Waterproof
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Portable Underwater Scuba Light Rechargeable 2600 Lumens Waterproof
PRODUCT SPECIFICATIONS:</
Portable Underwater Scuba Light Rechargeable 2600 Lumens Waterproof
PRODUCT SPECIFICATIONS:
| Model | W40VR R Underwater Dive Lights |
| Bulb | White CREE XM-L2 U2 LED *4 (max 2600 Lumens); Red CREE XP-E N3 LED*2 wavelength 620 nm (max 200 Lumens); Purple LED *2 wavelength 410nm (max 6W); UV LED*2 wavelength 365nm (max 6W) |
| Control |
Switch 1: Red> Purple> UV> off Switch 2: White high> White medium >White low> off The two switches can be operated separately or simultaneously. |
| Runtime |
White High Mode: 72Min; Red Light / Purple Light / UV light : 300min |
| Color temperature | 5000K (white light) |
| Reflector | No hotspot design, no reflector |
| Lens | 4mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 120° |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | 32650 rechargeable Li- ion battery * 1 |
| Battery Indicator | NA |
| Circuit Protection |
With battery over-discharging protection, polarity reversing protection |
| Operation voltage | 2.8V to 4.5 V |
| Waterproof | 100 meters underwater |
| Dimensions | 124.8mm (length)* 50mm (dia. of head) |
| Weight | 345 grams (without battery); 483 grams (with battery) |
| Underwater Weight | 483 grams (with battery) |
| Impact resistance | 1.5M. |
| Explosion Protection | with gas release valves |
BATTERY INSTALLATION
- Remove the tail by turning counter-clockwise.
- Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
- Mount the tail by turning clockwise.
BATTERY CHARGING
- Plug the charger in the wall power socket, the indicator light is green in the free-load status.
- Put the battery in the slot of the charger.
- The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
- Take out the fully charged battery and use them in the diving light.
ON/OFF
Push the button switch to turn it ON.
MODES CHANGING
- Successive push the switch 1 ON-OFF within two seconds to cycle through Red, Purple, UV Light, OFF;
- Successive push the switch 2 ON-OFF within two seconds to cycle through High, Medium, Low (white light), OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
Related Search
Find more related products in following catalogs on Hisupplier.com
Company Info
Xiware Technologies Ltd,. [China (Mainland)]
Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)
