Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Depth Rated to 200 Meters 7000 Lumen WG76W Underwater Video Lights
PRODUCT SPECIFICATIONS:
Model | WG76W Goodman Handle Diving Video Light |
Bulb | White CREE XM-L2 U2 LED *12 (max 6500 Lumens); CREE XP-E N3*4 (wavelength 620nm, max 400 Lumens) |
Modes | High>Medium> Low>Red> off |
Runtime | High (1.5h); Medium (3.0h); Low (5.0h); Red (8.0h) |
Color temperature | 5000K (white light) |
Reflector | No hotspot design, no reflector |
Lens | 5mm Polycarbonate Board |
Body material | Durable aircraft-grade aluminum |
Angle of light beam | 120° |
Surface treatment | Premium Type III hard-anodizing |
Color | Black |
Battery | Rechargeable Li- ion battery pack (18650 battery*6) |
Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
Fully charging time | 8-10h |
With gas release valves | |
Operation voltage | 9V to 13V |
Waterproof | 200 meters underwater |
Dimensions | 213.5mm (length)* 78.0mm (dia. of head) |
Weight | 1140 grams (with battery pack) |
Underwater Weight | 560 grams (with battery pack) |
Impact resistance | 1.5M |
PRODUCTION INTRODUCTIONS
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.
The Light CAN’T be used more than 5 minutes above water.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Medium, Low, Red, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
REPLACEMENT PARTS
CAT# DESCRIPTION
DG708 O-ring
DG709 Lens
Xiware Technologies Ltd,. [China (Mainland)]
Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)