CREE XML2 LED Scuba Diving Lights Rechargeable 2600 Lumen D34VR manufacturer from China Xiware Technologies Ltd,.

CREE XML2 LED Scuba Diving Lights Rechargeable 2600 Lumen

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: D34VR

CREE XML2 LED Scuba Diving Lights Rechargeable 2600 Lumen

QUICK DETAILS:

CREE XML2 LED Scuba Diving Lights Rechargeable 2600 Lumen

QUICK DETAILS:

The new generation Cree XM – L2 led.20% more efficient that its predecessor.
Most advanced Li-ion ceels.50% more power density than standard li-ion battery technology.
Super wide 120 degree angle of light beam.The polycarbonate has been designed to give you the widest beam possible.Rivalling that of reflector based lights.

PRODUCT SPECIFICATIONS:

Model	D34VR R Scuba Diving Light
Bulb	White CREE XM-L2 U2 LED 4 (max 2600 Lumens); Red CREE XP-E N3 LED2 wavelength 620 nm (max 200 Lumens); Purple LED 2 wavelength 410nm (max 6W); UV LED2 wavelength 365nm (max 6W)
Control	Switch 1: Red> Purple> UV> off Switch 2: White high> White medium >White low> off The two switches can be operated separately or simultaneously.
Runtime	White High Mode: 72Min; Red Light / Purple Light / UV light : 300min
Color temperature	5000K (white light)
Reflector	No hotspot design, no reflector
Lens	4mm Polycarbonate Board
Body material	Durable aircraft-grade aluminum
Angle of light beam	120°
Surface treatment	Premium Type III hard-anodizing
Color	Black
Battery	32650 rechargeable Li- ion battery * 1
Battery Indicator	NA
Circuit Protection	With battery over-discharging protection, polarity reversing protection
Operation voltage	2.8V to 4.5 V
Waterproof	100 meters underwater
Dimensions	124.8mm (length)* 50mm (dia. of head)
Weight	345 grams (without battery); 483 grams (with battery)
Underwater Weight	483 grams (with battery)
Impact resistance	1.5M.
Explosion Protection	with gas release valves

BATTERY INSTALLATION

Remove the tail by turning counter-clockwise.
Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
Mount the tail by turning clockwise.

BATTERY CHARGING

Plug the charger in the wall power socket, the indicator light is green in the free-load status.
Put the battery in the slot of the charger.
The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
Take out the fully charged battery and use them in the diving light.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.