Post Offer Free
Xiware Technologies Ltd,.  

Gold Index: 8977

You are here: home  > Led Underwater Lighting IP68 Scuba Dive Lights 6500K Color Temperature

Led Underwater Lighting IP68 Scuba Dive Lights 6500K Color Temperature 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: DG60

Led Underwater Lighting IP68 Scuba Dive Lights 6500K Color Temperature
 
 
PRODUCT SPECIFICATIONS:</str

Led Underwater Lighting IP68 Scuba Dive Lights 6500K Color Temperature

 

 

PRODUCT SPECIFICATIONS:

 

Model DG60 Goodman Handle Diving Light
Bulb White CREE XM-L2 U2 LED *6 (max 5000 Lumens)
Modes High> Low>Strobe> off
Runtime High (2.0h); Low(4.0h); Strobe (3.0h)
Color temperature 6500K
Reflector Glossy Aluminum reflector
Lens 8mm Polycarbonate Board
Body material Durable aircraft-grade aluminum
Angle of light beam 8° hot spot, 110° periphery
Surface treatment Premium Type III hard-anodizing
Color Black
Battery Rechargeable Li- ion battery pack (18650 battery*6)
Battery Indicator 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off
Charging Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection
Fully charging time 8-10h
  With gas release valves
Operation voltage 9V to 13V
Waterproof 200 meters underwater
Dimensions 213.5mm (length)* 78.0mm (dia. of head)
Weight 1187grams (with battery pack)
Underwater Weight 585 grams (with battery pack)
Impact resistance 1.5M

 

BATTERY CHARGING

  1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
  2. Plug the port of the charger in the ports on the light. (the positive and negative polar doesn’t matter, both ways work.)
  3. The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
  4. Take out the charger and use the light.

 

ON/OFF

Push the switch to turn it ON.

 

MODES CHANGING

 

Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.

 

SCUBA DIVING APPLICATION

 

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

 

CAUTION

 

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.

 

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.

 

WARRANTY RETURN POLICY

 

Please contact your local distributor or retailer for information on how to handle your warranty items.

 

REPLACEMENT PARTS

 

CAT#             DESCRIPTION

DG608           O-ring

DG609           Lens

 

bigPhoto
 Mr. Felix Cai

Tel: 86-755-29453256
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Xiware Technologies Ltd,. [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (194)