Waterproof Black Cansiter LED Diving Light 3000lumen 100m Diving

PRODUCTION DESCRIPTION:

1. Designed for the professionals using the canister dive light and primary diving lights.
2. New designed and strengthened dive circuit,super stand by.
3. Micro -computer chip low voltage warning and protection.
4. Efficient Cree LED chip with life span over 50,000 hrs.
5. Durable aircraft-grade aluminum.
6. Magnetically controlled switch
7. Waterproof IP - 68 
8. Premium Type III hard-anodizing
9. Anti-roll,slip resistant body design
10. Good-man handle for easy carry.

BATTERY INSTALLATION

1. Remove the top cover of the canister by turning counter-clockwise.
2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the cover by turning clockwise.

BATTERY CHARGING

1.Plug the charger in the wall power socket, the indicator light is green in the free-load status.

2.Put the battery in the slot of the charger.

3.The indicator light is red if the battery is not fully charged; it will turn green after fully charged.

4.Take out the fully charged battery and use them in the canister.

ON/OFF

Push the switch forward to activate the light.

The switch will go back to original position automatically.

MODES CHANGING

Successive switch ON-OFF within two seconds to cycle through high, low, strobe.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.