200M Underwater 5000 Lumens Research Cave Diving Lights in Aluminum Alloy DG60 manufacturer from China Xiware Technologies Ltd,.

200M Underwater 5000 Lumens Research Cave Diving Lights in Aluminum Alloy

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DG60

200M Underwater 5000 Lumens Research Cave Diving Lights in Aluminum Alloy

&

200M Underwater 5000 Lumens Research Cave Diving Lights in Aluminum Alloy

Advantage Features:

Rechargeable torch directy by AC or DC charger and without move out the battery
Type III military grade hard-anodizing aerospace-grade aluminium body
Magnet control knob switch moving for ON/OFF or brightness mode
One minute flash time to continue 10 to 20 minutes for low voltage blinking warning,when battery levels gets below warning value before the torch shut down.

PRODUCT SPECIFICATIONS:

Model	DG60 Goodman Handle Diving Light
Bulb	White CREE XM-L2 U2 LED *6 (max 5000 Lumens)
Modes	High> Low>Strobe> off
Runtime	High (2.0h); Low(4.0h); Strobe (3.0h)
Color temperature	6500K
Reflector	Glossy Aluminum reflector
Lens	8mm Polycarbonate Board
Body material	Durable aircraft-grade aluminum
Angle of light beam	8° hot spot, 110° periphery
Surface treatment	Premium Type III hard-anodizing
Color	Black
Battery	Rechargeable Li- ion battery pack (18650 battery*6)
Battery Indicator	100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off
Charging	Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection
Fully charging time	8-10h
	With gas release valves
Operation voltage	9V to 13V
Waterproof	200 meters underwater
Dimensions	213.5mm (length)* 78.0mm (dia. of head)
Weight	1187grams (with battery pack)
Underwater Weight	585 grams (with battery pack)
Impact resistance	1.5M

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.