Black 100 Meter Waterproof Canister Dive Light with 26650 Li-ion battery DH25 manufacturer from China Xiware Technologies Ltd,.

Black 100 Meter Waterproof Canister Dive Light with 26650 Li-ion battery

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DH25

Max 1000 Lumens DH25 Aluminum Canister Dive Light 100 Meters Waterproof

Specification:</

Max 1000 Lumens DH25 Aluminum Canister Dive Light 100 Meters Waterproof

Specification:

Model	DH25 Canister Diving Light/Diving Headlight
Bulb	CREE XM-L U2 LED (Max 1000 Lumens)
Color temperature	6500 K
Three output levels	High> Low>Strobe
Runtime	High: 210 min, Low: 360 min, Strobe: 300 min
Light head	80° vertical adjustable
Reflector	Glossy Aluminum reflector
Lens	6mm Polycarbonate Board
Body material	Durable aircraft-grade aluminum
Angle of light beam	10° hot spot, 110° periphery
Surface treatment	Premium Type III hard-anodizing
Color	Black
Battery	26650 Li- ion battery *2 in canister
Circuit Protection	With battery over-discharging protection, polarity reversing protection
Operation voltage	6V to 10V
Waterproof	100 meters underwater
Dimensions	light head: 70mm (length) 46mm (dia. of head); canister: 166(length)36mm (dia. of body)
Weight	513 grams (without batteries); 695 grams (with batteries)
Underwater Weight	360 grams (with batteries)
Impact resistance	1.5M

BATTERY INSTALLATION

Remove the top cover of the canister by turning counter-clockwise.
Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
Mount the cover by turning clockwise.

BATTERY CHARGING

1.Plug the charger in the wall power socket, the indicator light is green in the free-load status.

2.Put the battery in the slot of the charger.

3.The indicator light is red if the battery is not fully charged; it will turn green after fully charged.

4.Take out the fully charged battery and use them in the canister.

ON/OFF

Push the switch forward to activate the light.

The switch will go back to original position automatically.

MODES CHANGING

Successive switch ON-OFF within two seconds to cycle through high, low, strobe.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

WARRANTY RETURN POLICY

Please contact your local distributor or retailer for information on how to handle your warranty items.

REPLACEMENT PARTS

CAT# DESCRIPTION

DH258 O-ring

DH259 Lens