Scuba Diving Underwater Photography Light Multi-function UV 365nm D34VR manufacturer from China Xiware Technologies Ltd,.

Scuba Diving Underwater Photography Light Multi-function UV 365nm

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: D34VR

Scuba Diving Underwater Photography Light Multi-function UV 365nm

QUICK DETAILS:
&

Scuba Diving Underwater Photography Light Multi-function UV 365nm

QUICK DETAILS:

D34VR is multi-functional diving photographing light with white, red, purple and UV high-power LED. With brightness of 2600 lumens, light angle of 120°and max run-time over 5 hours, this professional video light can be used in various underwater environment.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

LIGHT PERFORMANCE:

Model NO.:D34VR
IP Rating:IP68
Certification:CCC, CE, FCC, RoHS, CE, RoHS, SGS and Ipx8
Emitting Color:White/red/purple/UV
Application:Professional Diving ,Underwater 100m
Model:2600 Lm New Video/Photo light
LED:CREE Xm-L U2 LED*10
Switch 1:red light-purple light- UV light-OFF
Switch 2:white light-high-low-SOS-OFF
Battery:32650 Li- Ion Battery *1
Operation Voltage:2.8V to 4.5V
Waterproof:100 Meters Underwater
Waterproof Standard:Waterproof 100m Underwater
Export Markets:Global

LIGHT SOURCE

Brightness:White light:2600lumens
Red light:200lumens
Purple light:6W
UV light:6W
Bulb: White CREE XM-L U2 LED *4 (max 2600 Lumens);
Red CREE XP-E N3 LED*2 (620nm)
Purple light x 2 wave length:410nm
UV x 2 length:365nm

ON/OFF

Push the button switch to turn it ON.

MODES CHANGING

Successive push the switch 1 ON-OFF within two seconds to cycle through Red, Purple, UV Light, OFF.
Successive push the switch 2 ON-OFF within two seconds to cycle through High, Medium, Low (white light), OFF.

BATTERY INSTALLATION

Remove the tail by turning counter-clockwise.
Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
Mount the tail by turning clockwise.

BATTERY CHARGING

Plug the charger in the wall power socket, the indicator light is green in the free-load status.
Put the battery in the slot of the charger.
The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
Take out the fully charged battery and use them in the diving light.

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.